Service, geotechnical reports
A report you can hand to a reviewer and build from.
The investigation, the analysis, and the recommendations in one clear document, sealed by Andrew Richardson, P.Eng.
What this is
The work, and what it answers
The report is the deliverable everything else points to. It sets out the site conditions found in the field, the analysis done on that data, and the recommendations that follow, in language a builder, a structural engineer and a municipal reviewer can each act on.
It is written to stand on its own. Someone who was not on site should be able to read it and understand what the ground is, what was assumed, and what to do about it. Borehole logs, test results, and figures are included so the conclusions can be checked.
Every report is prepared and sealed by Andrew Richardson, P.Eng. The seal is not a formality: it means an engineer has taken responsibility for the work inside the cover.
What arrives is a sealed report, authenticated to APEGA's standard for professional work products, with the site plan, the borehole or test pit logs, the laboratory results and the figures bound in behind the text. A reviewer can go from a recommendation back to the log and the test it rests on without asking for anything else.
The report is written for the structure and the site it was commissioned for. If the design changes, the loads change or the site is regraded, say so, because a recommendation written for one footing layout does not automatically carry to another. Questions from a reviewer or a lender after issue are answered, and where something needs to be put on paper, a short letter or an addendum is issued under the same seal.
A report starts with an investigation, and a report written without one is not worth the seal on it. If you do not yet have an investigation, the site investigation page describes the fieldwork the report is built on, and the quickest way to get the right scope is to describe what you are building and where.
When you need it
The situations this answers
- When a permit, lender or reviewer requires a geotechnical report.
- When a structural or civil design needs a documented geotechnical basis.
- When a project needs a defensible record of the ground conditions.
- When earlier verbal advice needs to be put on a sealed, referenceable footing.
Compiled into the sealed report
Logged profile, illustrative
Need the ground looked at before you build?
Describe what you are building and where. You get a reply, usually within one business day, setting out what the investigation would cover.
Sealed by Andrew Richardson, P.Eng. Serving southern and central Alberta
