Cross-cutting reference
Public data and industry resources
The public Alberta datasets, registries, and industry references we use to read a site before a rig ever moves, with honest notes on what each one can and can't tell you.
What this is
The work, and what it answers
Good geotechnical work starts at a desk, not at a drill rig. Before a rig moves onto your land, we read the public record: what the province has already mapped about the soils, the groundwater, and the geology under your quarter section. This page is the transparency companion to the standards page. It lists the same free Alberta public tools we use, so you can look up your own land and understand what we are looking at.
You will find soil and terrain mapping (AGRASID), groundwater and water-well records, provincial surficial and bedrock geology from the Alberta Geological Survey, a note on where to find municipal servicing standards, and a short note on what to look for in an accredited testing laboratory. The notes are offered as references so you can look things up yourself, not as endorsements and not as a business relationship.
One honest caveat runs through the whole page: public data narrows expectations and shapes a smarter, cheaper drilling program, but it never replaces a borehole. A regional map is drawn at the scale of a landscape; your building envelope is the scale of a footing. Every recommendation issued rests on site-specific data that is logged, analysed, and sealed by Andrew Richardson, P.Eng. The gap between the map and your lot is exactly what the investigation closes.
Andrground Engineering serves southern and central Alberta. Questions about any of these resources, or whether a desktop review is enough for your site: call 403 700 8672 or email andrew@andrground.com.
Method
The public record, at a glance
Three provincial datasets do most of the heavy lifting in a desktop review, plus one registry you will want if a private-sewage job turns out to be beyond scope. Here is what each one maps and where it earns its keep. The sections below go deeper on each.
None of these is a substitute for a site-specific investigation. They say what to expect and where to drill; the boreholes show what is actually there.
| Resource (owner) | What it maps | Best used for |
|---|---|---|
| AGRASID / Alberta Soil Information Viewer (Alberta Agriculture and Irrigation) | Soil landscapes, parent material, drainage class, and agricultural capability across the settled agricultural region | An early read on likely soil textures and drainage before drilling |
| Alberta Water Well Information Database (Government of Alberta) | Roughly 500,000 water-well drilling reports, lithology logs, and static water depths | Expected depth to water and the character of nearby well logs |
| Alberta Geological Survey, surficial & bedrock geology (AER / AGS) | Glacial deposits, drift thickness, bedrock topography, and bedrock geology | Regional geological context and aggregate or bedrock expectations |
| Private Sewage Certified Contractors List (Government of Alberta) | Public registry of certified private-sewage installers | Finding a certified installer when a job is beyond a given scope |
Soil and terrain mapping: AGRASID
The Agricultural Regions of Alberta Soil Inventory Database (AGRASID), maintained by Alberta Agriculture and Irrigation, is a spatial database of soils covering the roughly 26 million hectares of Alberta's settled agricultural region. The companion Alberta Soil Information Viewer lets you query it by location. Together they describe the soil landscape: the parent material (glacial till, lake sediments, outwash), drainage class, texture group, salinity and organic risk, and land-suitability ratings down to the quarter section.
For a raw acreage or a subdivision concept, this is an excellent first read. It says whether to expect clay-rich till, a sandy outwash, or problem ground such as saline or organic soils, before a drilling layout is committed to. It is mapped at a land-management scale, in polygons, so it is a screening tool, never a lot-specific answer.
One point worth being clear about: for a private sewage site evaluation, Alberta's Private Sewage Systems Standard of Practice 2021 requires the design to be built from soil texture and structure logged in the field, a minimum of two soil profiles with at least one excavated test pit, and described using the Canadian System of Soil Classification. It is not built from a soil map, and it is not built from a percolation test (a perc test may only support a soil-based design, never be its basis). So AGRASID informs the private-sewage picture, but the excavated profile is the method.
- Good for: expected texture, drainage, parent material, salinity and organic risk across a region
- Not for: lot-specific bearing, the seasonal-high water table, or a private-sewage design basis
- Companion tool: the Alberta Soil Information Viewer for point queries
Groundwater: the Alberta Water Well Information Database
The Alberta Water Well Information Database, run by the Government of Alberta's Groundwater Information Centre, holds roughly 500,000 water-well drilling reports, plus test holes, springs, and pump tests, with a few thousand new records added each year. You can search it by legal land description, owner name, or well identifier, and read the driller's lithology log, the completion depth, and the reported static water level for wells near your site.
For a landowner, this is often the single most useful free resource. Neighbouring well logs give an early, honest sense of how deep the water is likely to sit and what the driller hit on the way down. That shapes where standpipes and piezometers are set and how long they are monitored.
The limits are real. Driller logs vary in quality, they are point data that can change quickly across a valley or a slope, and a one-time reported water level is not the same as a monitored seasonal-high water table. The database is treated as a strong hint, then verified on site. The interactive Water Wells map and the Groundwater Information Centre are the tools to use.
- Good for: probable depth to water, aquifer type, and nearby lithology logs
- Not for: a defensible seasonal-high water table, which needs on-site monitoring over time
- Tip: search by your legal land description to pull the closest well records
Geology: the Alberta Geological Survey
The Alberta Geological Survey (AGS), part of the Alberta Energy Regulator, publishes the province's surficial and bedrock geology. The surficial geology mapping (for example AER/AGS Map 601) shows the glacial deposits at surface: the tills, the glaciolacustrine clays, the outwash sands and gravels, along with regional inset maps of drift thickness and bedrock topography. Bedrock geology (Map 600) shows what lies beneath. Both are available through interactive map viewers and the AGS Open Data Portal in GIS formats.
This is the layer that explains the why. It sets out the glacial history that produced the stiff clay till and the clay shale bedrock routinely expected across southern and central Alberta, flags where sand and gravel deposits may occur, and gives a regional read on how deep bedrock sits. That context turns a set of borehole logs into a story that holds together.
Like the others, it is regional. The provincial compilation is generalized at a scale of about 1:1,000,000, so it frames the setting rather than resolving your building envelope.
- Good for: glacial and bedrock context, drift thickness, and aggregate potential
- Not for: lot-scale stratigraphy; the provincial mosaic is a regional, generalized scale
- Formats: interactive viewers plus downloadable GIS data on the AGS Open Data Portal
Municipal servicing standards, and calling before you dig
Beyond the provincial datasets, most development questions eventually run into a municipal standard. Across southern and central Alberta, individual municipalities publish their own engineering and servicing (or design and construction) standards, and these commonly govern the scope of a geotechnical investigation for subdivisions, roads, and stormwater facilities. Cities such as Calgary, Red Deer, Lethbridge, and Medicine Hat, and counties such as Rocky View, Foothills, and Cypress, each maintain their own; you will typically find them on the municipality's website under engineering, development, or planning.
These standards vary, and specifics such as required borehole spacing or investigation depth are set by each municipality rather than by one province-wide rule, so the governing standard for your parcel is confirmed rather than assumed. It is then cross-referenced with the provincial and national codes, the National Building Code (2023 Alberta Edition), the Canadian Foundation Engineering Manual, and, for provincial infrastructure projects, the Geotechnical Investigation Guidelines for Alberta Infrastructure Projects. The full reference shelf lives on the standards page.
Before any ground disturbance, we submit a locate request through Utility Safety Partners (Click Before You Dig), and the ground disturbance runs to Alberta OHS Code Part 32. That is not optional and it is not a formality; it is how nobody hits a buried line.
Accredited laboratories, and what to look for
Clients often want to know what to look for in Alberta drilling and testing so they can check for themselves. This is a reference note, not a set of endorsements, and it does not describe any business relationship. Verify an operator's current standing and accreditation yourself before you rely on it.
For a testing laboratory, the thing to look for is accreditation: ISO/IEC 17025 through the Standards Council of Canada or CALA (the Canadian Association for Laboratory Accreditation), and CCIL certification for aggregate and concrete work. Accreditation is what tells you a result was produced under a controlled, audited quality system.
Public data narrows the questions; a driller and an accredited lab produce the site-specific facts; and a Professional Engineer registered with APEGA logs, analyses, and seals the interpretation into a report you can build on. That last step is the one that carries the responsibility, and it is the one Andrew Richardson, P.Eng. owns on every job.
| Capability | What it covers | What to look for |
|---|---|---|
| Solid stem and hollow stem auger drilling | Routine soil sampling and test holes across most Alberta sites | A rig sized to the access, and split spoon sampling to the depth the structure actually needs |
| Limited access and track mounted rigs | Tight lots, soft ground, and sites a truck rig cannot reach | Whether the rig can physically get to the hole locations the investigation plan calls for |
| Test pitting | Shallow profiles, private sewage evaluations, and fill delineation | A logged profile with photographs, not just a depth and a soil name |
| Accredited geotechnical and materials laboratory | Classification, strength, consolidation and compaction testing | ISO/IEC 17025 accreditation, and CALA or CCIL scope covering the specific test being run |
Logged and sealed by Andrew Richardson, P.Eng.
Typical prairie profile from public plus drilled data (illustrative)
When you need it
The situations this answers
- You are screening a raw quarter section or acreage before you buy and want an early read on likely soils and groundwater
- You want to estimate the probable depth to water from neighbouring well logs before commissioning your own boreholes
- You are trying to understand why a region is stiff clay till, soft lake clay, or sand and gravel, and what that means for foundations
- You need to find your municipality's servicing or engineering standards for a subdivision, road, or stormwater submission
- You want to know what accreditation to look for in a testing laboratory
- You need the public registry to confirm a certified private-sewage installer when a job is beyond a given scope
- You want to see the codes and methods the reports issued here actually follow (that lives on the standards page)
Standards behind this work
See the full standards shelf- National Building Code, 2023 Alberta Edition
- Canadian Foundation Engineering Manual (CFEM), 5th Ed.
- Geotechnical Investigation Guidelines for Alberta Infrastructure Projects (v2.0)
- Alberta Private Sewage Codes and Standards (hub)
- APEGA Practice Standards & Guidelines
- Utility Safety Partners (Click Before You Dig)
Need the ground looked at before you build?
Describe what you are building and where. You get a reply, usually within one business day, setting out what the investigation would cover.
Sealed by Andrew Richardson, P.Eng. Serving southern and central Alberta
